THE TAPROOM 4

Viewing 20 posts - 461 through 480 (of 875 total)
  • Author
    Posts
  • #37560
    ddaines
    Participant

      HNY everyone may 2019 be a good one for all ;)

      #37562
      Mornedhel
      Participant

        Wish you a better new year

        #37563
        twrich
        Participant

          Best Wishes to all for this new year! Barli, let’s start off with a round of drinks for everyone!

          #37565
          ddaines
          Participant

            Thank you Tom ;)

            #37569
            Maenas
            Participant

              HAPPY BELATED NEW YEAR! Cheers friends!

              MZ – I bought the first one, and I regret it since I opened the box.
              I haven’t bought any of the new ones, although I’ve been tempted by some of the releases, your comments, my own believing and an excessive price retained me from doing so.

              The loss of detail might be caused by the “sanding” made on the printed master to erase the printed lines of it. Or could also be due to a lack of detail on digital file or might be also a lack of resolution of the master.

              I’ve seen lots of metal miniatures coming from 3D printed masters that are hundreds of times better.

              Mithril has probably lost the quality seal on the whole MZ line somewhere in translation….

              Editing just to add, that now I don’t even bother to vote on the fellowship, it doesn’t matter because the result miniature will be deceiving, not from conception, but from the printing/casting. :(

              #37570
              Theobald
              Participant

                huoomm … thank you very much, Master Maenas, for that very interesting statement about those MZ-releases … hom … as it meets my opinion very well … grrrrrruUOo°mmm … just compare one of those very poor MZ-figures with those from the old ones …. huommrhûom … for me that MZ-“mis-development” simply is horrible in each and every way … huom … sorry to say that here again – but I’m still angry about this … hom

                #37571
                Mornedhel
                Participant
                  Maenas wrote:
                  HAPPY BELATED NEW YEAR! Cheers friends!
                  The loss of detail might be caused by the “sanding” made on the printed master to erase the printed lines of it. Or could also be due to a lack of detail on digital file or might be also a lack of resolution of the master.

                  I am not so absolute with MZ beside the lack of details. Some of them offered new poses or vignettes not met before as MZ651.

                  Master Maenas, 3D polymer printing doesn’t need any sanding and the mould master at PA I met some years ago is performing the same “mechanical” job as for the M series.
                  One point is The Man seems less enthusiast in sculpting fine detail as before (as well as exchanging with the fellowship members).

                  #37572
                  Maenas
                  Participant
                    Mornedhel wrote:
                    I am not so absolute with MZ beside the lack of details. Some of them offered new poses or vignettes not met before as MZ651.

                    I agree with that, and I was tempted by those, but I don’t usually buy a mini just for its pose. :P In fact I nowadays don’t buy a lot of miniatures, and I might have come a bit more “exquisite” with what I take home, because my wallet has now a narrower budget.

                    Mornedhel wrote:
                    Master Maenas, 3D polymer printing doesn’t need any sanding and the mould master at PA I met some years ago is performing the same “mechanical” job as for the M series.
                    One point is The Man seems less enthusiast in sculpting fine detail as before (as well as exchanging with the fellowship members).

                    You might be right, as I am not even an “aficionado” to 3D printing, but as far as I know the good printing (highly expensive) does not need it. On the other hand, I had read somewhere, that when your master is not good enough, you can get rid of the “printed texture” by sanding the master.

                    (Sanding can be performed in a lot of ways)

                    I did not find the place where I read it, but here you have an example of what I mean ;)
                    https://rigid.ink/blogs/news/how-to-smooth-pla-to-a-mirror-finish

                    #37575
                    Maenas
                    Participant

                      Passing by to share some news from the outskirts of hobitton… I’ll leave a poster on the news wall…

                      For those who could be interested in Middle earth illustrations&art:

                      Donato Gianccola is going to publish a fine artbook on the lore: +info (and fine illustrations) on the link below
                      http://www.muddycolors.com/2019/01/middle-earth-journeys-in-myth-and-legend/

                      #37576
                      Theobald
                      Participant

                        huom … thank you for that link, Master Maenas, that’s very interesting …

                        #37577
                        ddaines
                        Participant

                          Thank you, I have this one on my ‘watch’ list ;)

                          #37578
                          Thingol
                          Participant

                            Very nice indeed… thanks for this link…

                            #37584
                            hsf62
                            Participant

                              Master mindx2 please join me for a drink.

                              #37585
                              hsf62
                              Participant

                                Master Barliman do you have something very strong? I think our friend needs it!;)

                                #37586
                                mindx2
                                Participant

                                  I need a strong one!

                                  #37589
                                  Thingol
                                  Participant

                                    Recently there is more dust in the inn than the thirsty free folk members….

                                    #37590
                                    Thingol
                                    Participant

                                      Can you sell me one cold beer dear master innkeeper…. knock..knock..

                                      #37596
                                      twrich
                                      Participant

                                        I will join you for a beer, Brave Sam!

                                        #37597
                                        Thingol
                                        Participant

                                          But it looks like we need to open and drink beer from our own stock. The bar is locked for days….

                                          #37602
                                          Milo
                                          Participant

                                            Hi everyone !

                                            I finally managed to set up all things at work and can focus on mithrils now. I first need a huge breakfast !
                                            Barliman ? Nob, do your best please, you won’t be unpaid, trust me.

                                          Viewing 20 posts - 461 through 480 (of 875 total)
                                          • The topic ‘THE TAPROOM 4’ is closed to new replies.